OWNER'S INSTRUCTION
23
ENGLISH
Individual vane angle control
It is the function that can control 4 vane an-
gles individually in the ceiling type 4Way cas-
sette product group.
1 Press the VANE ANGLE button.
Individual vane angle control symbol will
blink.
- If you press the VANE ANGLE button for
3 seconds in that time, all vanes are set
to standard angle.
2 Set each vane angle by pressing the VANE
ANGLE button.
- Every time the button is pressed, corre-
sponding vane angle and set values are
displayed.
- When up direction button is pressed, the
display window appears as of the figure in
the right, and the angle can be set to 1~6.
- Multi-V Console products can be con-
trolled by up key in the up/down control.
3. Press SET/CLEAR button to reserve or can-
cel the individual vane angle control func-
tion.
- There may be differences between
wireless remote controller
up/down/left/right buttons and the wind
discharge port directions.
- Set desired angle with checking the
vane angle movement of the product.
- The individual vane control function is
an additional function of a product, and
it may not work in some products.
To Next Page
Loading...
