Single CAC Outdoor Unit
6. Capacity Tables
60
Standard Inverter
1Ø Synchro Equlvalent capacity table
Max Power input of each model is tabulated below
(Duo)
(Trio)
(Quartet)
Note
1. DB : Dry bulb temperature(), WB : Wet bulb temperature()
2. TC : Total capacity(kW), SHC : Sensible Heating Capacity(kW)
3. PI : Power Input (kW, Compressor + indoor fan motor + outdoor fan motor)
4. All capacities are net. A deduction (cooling mode) or an addition (heating mode) of Capacity due to operating heat of indoor unit motor is reflected.
5. For Synchro model operating simultaneously with combinations, The individual capacities of indoor unit are not gived because they are same with the
Single model capacities.
6. Direct interpolation is permissible. Do not extrapolate.
7. Rated capacities and power inputs are based on standard temperature and piping conditions, and it can be found on specifications table. Except for
rated value, the performance is not guaranteed.
8. In accordance with the test standard(or nations), the rating will vary slightly.
Model CT24 NP2(4) * 2 CM24 N14 * 2 CV24 NJ2 * 2 CB24L N32 * 2
PI 4.60 4.60 4.60 4.60
Model CT18 NQ2(4) * 3 CM18 N14 * 3 CV18 NJ2 * 3 CB18L N22 * 3
PI 5.20 5.20 5.20 5.20
Model CT12 NR2 * 4 CB12L N22 * 4
PI 4.82 4.82
To Next Page
Loading...
