To Next PageTo Next PageWhat to do if my LG Blu-ray Player has no picture?
If your LG Blu-ray Player shows no picture, ensure that your TV is set to the correct video input mode. Also, verify that the video cable is securely connected. If the issue persists, the selected resolution may not be compatible with your TV; try selecting another resolution using the RESOLUTION button.
Why does my LG Blu-ray Player not start playback?
If your LG Blu-ray Player isn't playing a disc, make sure the disc is inserted correctly with the playback side down. The player might not start playback if the inserted disc is unplayable, so verify that the disc type and regional code are compatible. Also, check if the rating level is set and change it if necessary. If the disc was recorded on another unit, finalize it on that unit. Lastly, ensure that the remote control is pointed at the remote sensor on the player.
Why is there no sound from my LG Blu-ray Player?
If there is no sound from your LG Blu-ray Player, ensure that the equipment connected with the audio cable is set to receive the disc signal output by selecting the correct input mode on the audio receiver. Verify that the equipment connected with the audio cable is turned on. Also, check that the [AUDIO] options are set correctly (see page 20). Finally, if the player is in reverse play, fast forward, slow motion, or pause mode, return to normal playback.
General| Type | Blu-ray Player |
|---|---|
| Disc Capacity | 1 |
| Output Resolution | 1080p |
| HDMI Output | Yes |
| USB Port | Yes |
| Network Connectivity | No |
| BD-Live | No |
| Component Video Output | Yes |
| Composite Video Output | Yes |
| Digital Audio Output (Optical) | Yes |
| Ethernet Port | No |
| Video Playback Formats | MPEG-2, MPEG-4 AVC, VC-1 |
| Audio Playback Formats | LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS |
| Disc Types Supported | BD, DVD, CD |
