Operating 31
Operating
3
y
If this unit displays an error message
“NO USB” or “ERROR” follow check procedure
below.
-
Your iPod/iPhone is not connected rmly.
-
This unit recognizes your iPod/iPhone as
an unknown device.
-
Your iPod/iPhone is exceptionally low in
power.
/
The battery needs to be charged.
/
If you charge the battery while iPod/
iPhone is extremely low in power,
it may take longer to be charged.
y
Depending on your iPod/iPhone’s software
version, its operation may dier or not be
possible to control your iPod/iPhone with
this unit.
y
If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
this unit and then use it.
y
If you have a problem with your iPod/
iPhone, please visit www.apple.com/
support.
y
You may need additional operation for iPod
touch or iPhone, for example “unlock” by
dragging the slider.
y
We recommend installing the latest
software version.
,
Note