POWER ON
Press ‘PLAY/PAUSE’ key.
Front ‘Play/Pause’ + Remote Control ‘Forward skip’
push same timing during 5 seconds.
Front ‘Play/Pause’ + Remote Control ‘Forward skip’
push same timing during 5 seconds.
FLD no disc status or PORT.IN status.
FLD ‘write ok’
FLD ‘OP00-00’
FLD ‘E2P CLR’
Move to appropriate position and make changes
with remote control ‘skip, sound effect, stop’ key.
Completed
1-7
SERVICE INFORMATION FOR EEPROM