88
When the following settings are set,
Ringer is not activated.
When
All Sounds Off/ Alarm
Only
is set or individual Contact
Ringer ID is set to
No Ring
.
9.2 End Call Options
Allows you to set the option to end
a call.
1. From standby mode, press
[
MENU
].
2. Press
Settings & Tools
.
3. Press
Call Settings
.
4. Press
End Call Options
.
5.
Use the Directional Key to
select
Close Slide or End Key
Only
, then press .
9.3 Call Forwarding
Allows you to configure call
forwarding.
1. From standby mode, press
[
MENU
].
2. Press
Settings & Tools
.
3. Press
Call Settings
.
4. Press
Call Forwarding
.
5. Select
Forward Call
, enter the
number you wish to forward your
calls to, then press
[FORWARD]
. You can also
select
Cancel Forwarding
if you
are currently forwarding your
calls.
9.4 Auto Retry
Allows you to set the length of time
the phone waits before
automatically redialing a number
when the attempted call fails.
1. From standby mode, press
[
MENU
].
2. Press
Settings & Tools
.
3. Press
Call Settings
.
4. Press
Auto Retry
.
5. Use the Directional Key to
highlight a setting, then press .
The following options are
available:
Off/ Every 10 Seconds/ Every
30 Seconds/ Every 60 Seconds
Settings & Tools
88
VN251S_VZW_UG_EN_V1.0_130410.qxd 4/11/13 1:44 PM Page 88
To Next Page
Loading...
