38
OPERATION
• To set the rack to the middle position, it may be
easier to lower the rack all the way down and
then raise each side of the rack individually until
it clicks into place.
• There is a 56 mm gain in height when the upper
rack is moved to the lower position.
• After adjusting the rack levels, check that the
spray arms are free to rotate.
• With the lower position of the upper rack, check
if the bottom part of upper rack including spray
arm is not disturbing items on the lower rack.
• When the upper rack is in the lower position,
push in the upper rack first, and the lower rack
later.
• Pull out the lower rack first, and the upper rack
later.
• When the upper rack is in the lower position, the
possible height of dishes differs with models
where the cutlery rack is fitted.
Loading the Cutlery Basket
Daily Use Load
For Large utensils, such as whisks, the cover can be
opened by being unhinged.
Place forks and spoons in the cutlery basket with
their handles downwards.
• To prevent injuries, place knives and other
utensils with sharp points on the cutlery basket.
• If you want to load them in the cutlery basket,
place them with the pointed edges facing
downwards.
• Do not obstruct the rotation of the spray arms.
• The cutlery shouldn’t be longer than 18 cm.
Loading the Cutlery Rack
The cutlery rack is best suited for flatware and most
cooking or serving utensils. It can also fit small
prep bowls and lids. The separators on the cutlery
≤ 18cm
To Next Page
Loading...
