16 INSTALLATION
Reversing the
Door(DLEX4500*, DLGX4501*)
WARNING
THE DRYER DOOR IS VERY LARGE AND HEAVY.
Failure to follow the instructions below can result
in damage to the dryer, property damage or
injury to persons.
• To avoid damage to the dryer or the door,
support the door with a stool or box that fits
under the door, or have an assistant support the
weight of the door.
• Always reverse the door BEFORE stacking the
dryer on top of the washer.
• Avoid dropping the door to avoid damage to the
door or the floor.
1
Open the dryer door.
Open Door
2
You will be removing the screws shown below
(6 on left, 4 on right).
3
Remove the four decorative screws on the left
using a screwdriver.
Decorative
Hinge
Screw
4
Remove the two latch screws and the latch.
Latch Screw
CAUTION
Be sure to support the weight of the door before
removing the hinge screws.
5
Hold the hinge in place while removing the
four hinge screws (to prevent the door from
dropping).
Hinge Screw
6
Remove the door from the cabinet cover.
Remove
Door
To Next Page
Loading...
Need help?
General
