with a screwdriver. Save these for step 4.
2. While supporting the door, remove the 2 screws on the door hinge. Remove the door.
3. Turn the door upside down and line up the holes in the hinge with the holes on the opposite side of the cabinet.
Reinstall the door with the screws removed in step 2.
WARNING
• Be sure to support the weight of the door before installing the hinge screws.
4. Install the two decorative screws, the latch, and two latch screws removed in step 1 on the opposite side from
To Next Page
Loading...
Need help?
General
