Installation Instructions
10
Level the dryer
1. Level the dryer is to prevent undesirable noise
and vibration.
Locate your dryer on a solid, level floor. Make
sure it is not subjected to splashing water or
freezing temperatures. Do not store flammable
materials near the dryer.
2. If the dryer is not properly level, adjust the front
leveling legs up and down as necessary.
Turn the legs clockwise to raise the dryer and
counterclockwise to lower the dryer. Check the
dryer diagonally to make sure it does not rock
either way. Readjust the legs if necessary.
Diagonal Check
When pushing down corners of the dryer,
the machine should not move at all.
(Check in either direction.)
If machine rocks when pushing the machine top plate
diagonally, adjust the feet again.
Adjustable feet
Adjustable feetAdjustable feet
Raise Lower
I
F
nstallation Instructions
❊
To Next Page
Loading...
Need help?
General
