LG DLEX7600 E Series - User Manual

Questions and Answers

H
herreraashleyAug 5, 2025
What to do if my LG Dryer display indicates a problem with the exhaust system?
- J
  jessefergusonAug 5, 2025
  Do not use the dryer until the exhaust system has been cleaned and/or repaired. Using the dryer with a severely restricted exhaust can cause property damage. Check the outside dryer vent while the dryer is running. If the exhaust system is extremely long, have it repaired or rerouted. Keep the area around the dryer clean and free of clutter. Check the vent hood for damage or lint clogging. Make sure the area around the vent hood is clear.
R
rgarciaAug 11, 2025
What to do if my LG Dryer shows PS, PF, or nP error?
- A
  Anthony BowenAug 11, 2025
  If your LG electric dryer displays a PS, PF, or nP error, it could be due to a power issue. First, check the power cord connection to the terminal block, referring to the Connecting electric dryers section of this manual for instructions. Also, verify that a house fuse hasn't blown, the circuit breaker hasn't tripped, or there isn't a power outage. Try resetting the circuit breaker or replacing the fuse, without increasing its capacity. If a circuit overload is the cause, have it corrected by a qualified electrician.
B
Bradley PhamAug 16, 2025
Why does the FLOW SENSE[TM] indicator on my LG DLEX7600 E Dryer show four bars?
- J
  John RodriguezAug 16, 2025
  If the FLOW SENSE[TM] indicator on your LG dryer displays four bars during the drying cycle, it indicates restrictions in the ductwork due to lint buildup or debris. To resolve this, consider installing a shorter or straighter duct run. The ductwork should be checked and cleaned soon. While the dryer can still be used in this condition, drying times may be longer. Note that the indicator will remain on for two hours after the cycle ends, and opening the door or pressing the POWER button will not clear it.
J
Jonathan TranAug 22, 2025
What does tE1 or tE2 error mean on my LG Dryer?
- J
  Jonathan GibsonAug 23, 2025
  The error codes tE1 or tE2 on your LG dryer indicate a temperature sensor failure.
J
Jennifer HigginsAug 28, 2025
What does HS error mean on my LG Dryer?
- S
  Stephanie KellerAug 28, 2025
  The HS error code on your LG dryer indicates a humidity sensor failure.

LG DLEX7600 E Series Specifications

General

Type	Electric
Capacity	7.3 cu. ft.
Wi-Fi Connectivity	Yes
Sensor Dry	Yes
Energy Star Certified	Yes
SmartDiagnosis	Yes
Dry Levels	5
Wrinkle Care Option	Yes
Color	White
Dryer Venting	Vented