LG DLGX3251W

17
ENGLISH
Reversing the door (cont.)
1. Move the door to the left side and line up the holes in the
hinge with the holes in the cabinet.
2. Hold the hinge in place while inserting the two hinge screws
(to prevent the door from dropping).
3. Insert the latch on the right side and install the latch screws.
4. Insert the two decorative screws on the right side.
5. Check that the door closes and latches properly.
Latch
Screw
Hinge Screw
Decorative
Hinge
Screw
Swing Door
Hinge hole
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
w
WARNING







THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
w
CAUTION
Be sure to support the weight of the door before removing the
hinge screws.