1. Open the dryer door.
2. You will be removing the screws shown below
(4 on left, 2 on right).
3. Remove the two decorative screws on the left using a
screwdriver.
Reversing the door
4. Remove the two latch screws and the latch.
5. Hold the hinge in place while removing the two hinge screws (to
prevent the door from dropping).
6. Remove the door from the cabinet cover.
Decorative
Hinge
Screw
Open Door
Remove
Door
Hinge Screw
Latch Screw
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
w
WARNING
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
w
CAUTION
Be sure to support the weight of the door before removing the
hinge screws.
To Next Page
Loading...
