Before using the Tag On function
- The Tag On function allows you to conveniently
use the LG Smart DiagnosisTM and Cycle
Download features to communicate with your
appliance right from your own smart phone.
To use the Tag On function:
1. Download the LG Smart Laundry&DW App to
your smart phone.
2. Turn on the NFC (Near Field Communication)
function in your smart phone.
The Tag On function can only be used with smart
phones equipped with the NFC function and based
on the Android operating system (OS).
1. Enter the "Settings" menu of
the smart phone and select
"Share & Connect" under
"WIRELESS & NETWORKS."
Look for the Tag On icon next to the LED screen
on the control panel. This is where you position
your smart phone when using the Tag On function
with the LG Smart Diagnosis™, Cycle Download,
and Laundry Stats features of the LG Smart
Laundry&DW application.
When you use the Tag On function, position your
smart phone so that the NFC antenna on the back
of your smart phone matches the position of the
Tag On icon on the appliance. If you do not know
the position of your NFC antenna, move your smart
phone very slightly in a circular motion until the
application verifies the connection.
Because of the characteristics of NFC,
if the transmission distance is too far, or if there is
a metal sticker or a thick case on the phone,
transmission will not be good.
Press in the LG Smart Laundry&DW app
for a more detailed guide on how to use the Tag
On function.
2. Set "NFC“ and “Direct/
Android Beam” to ON,
and select “NFC".
3. Check "Use Read and
Write/P2P receive".
•
Turning on the NFC function of the
smart phone
•
The Tag On guide
The Tag On icon
Tag On position
Depending on the smart phone manufacturer
and Android OS version, the NFC activation
process may differ. Refer to the manual of
your smart phone for details.
NOTE
1
2
1
2
?
GGGGGGGGGGG
To Next Page
Loading...
Need help?
General
Weight and Dimensions
