LG DM2350A - Page 21

ENGLISH
21
WATCHING TV
TowatchDVB-Cinthecountriesexcluding
Finland,Sweden,DenmarkandNorwayselect'--'
astheCountryinOPTION.
YoucanselectUsermodeorFullmodeinAuto
Tuning.
Thecorrespondinghomefrequencyinformation
mayneedtobechangedwhentuningtheUser
mode,andthecorrespondinginformationdepends
ontheCableServiceOperator(SO)inservice.
DuringFullmodetuning,somechannelmaybe
restrictedforsomeCableServiceOperator(SO),
anditmaytakealongtimefortuning.
If you select the “- -” of Country Setting,
(Except for Finland, Sweden, Denmark and
Norway)
NOTE

Yourcableprovidermaychargefortheir
services,orrequireyoutoagreetoitsitems
andconditionsofbusiness.

DVB-CCablemaynotoperatecorrectlywith
somecableproviders.

CompatibilitywithDVB-Cdigitalcable
broadcastsisnotguaranteed.

WhenyouselecttheCable,theCable
Service Operatorselectionscreencandiffer
ornotexistbytheCablesituationofthe
applicablecountry.
ThepopupwindowtoselectbetweenService
Operatorisonlyshowninitiallyforthe3cases
whenyouaccessingtheInitial Settingmenu,
whenyouchangefromAntennatoCableor
whenyouaccessthemenuafterchangingthe
Country.
WhenyouwanttoselectbetweenService
Operatorasidefromtheabove3cases,you
candosobyselectingSETUP→Cable DTV
Setting→Service Operator.

AcquiredcertificationSO:Sweden(Comhem,
CanalDigital),Denmark(YouSee,Canal
Digital,Stofa),Norway(CanalDigital).
IftherearenotanyServiceOperatorthatyou
want,selectOther Operators.
Ifyouselect"OtherOperators",ortheselected
countrysupports"OtherOperators"only,itmay
takesometimetosearchallthechannels,orit
maynotsearchsomeofthechannels.
Ifsomeofthechannelsdonotappear,follow
thestepsbelow.
1.SETUP → Auto Tuning → Cable
2.Inputadditionalvaluessuchasthe
frequency,symbolrate,modulation,and
networkID(Youcanaskyourcableservice
providerfortheaboveinformation).

Thefollowingvaluesareneededinorderto
searchallavailableprogrammesquicklyand
correctly.Thecommonlyusedvaluesare
providedas"default".However,forcorrect
settings,pleaseinquireofthecableservice
provider.WhenrunningAutoTuningin
DVBcablemode,selectingFullwillsearch
throughallfrequenciestofindavailable
channels.Inthecasewhentheprogramme
isnotsearchedbyselectingtheDefault,
performthesearchingbyselectingtheFull.
However,inthecasewhentheprogramme
issearchedbyselectingtheFull,theAuto
Tuningtimecanbetakentoomuch.
»
Frequency:Enterauser-definedfrequency
range.
»
Symbol rate:Enterauser-definedsymbol
rate(Symbolrate:Speedatwhichadevice
suchasmodemsendssymbolstoa
channel).
»
Modulation:Enterauser-defined
modulation.(Modulation:Loadingofaudioor
videosignalsontocarrier).
»
Network ID:Uniqueidentifierallocatedfor
eachuser.