LG dryer User Manual

Installation Instructions
6
I
F
nstallation Instructions
33.5"
(850 mm)
23.6"
(600 mm)
25.2"
(640 mm)
The following instructions will help guide you through the initial steps of setting up your dryer for use.
Please note that every section of this manual provides important information regarding the preparation and use of
your dryer, and it is important that you review this entire manual before proceeding with any installation or use.
More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are
provided in other parts of this manual.
Choose a location with a solid floor for your dryer. Place the dryer at least eighteen inches above the floor for a
garage installation. After placing the dryer in the desired location, make sure that it has the required clearances
shown.
Leveling legs should be secured.
All four legs should be on a solid, even floor and properly leveled as shown in this manual.
If dryer is not level, laundry may not be able to accurately detect the moisture level in the clothes.
When leveling, please be cautious to avoid injury.
Note
STEP 1 Positioning the Dryer.

LG dryer Specifications

General

Brand	LG
Model	dryer
Category	Dryer
Language	English

Summary

Installation Instructions

STEP 1 Positioning the Dryer

Choose a location with a solid floor for your dryer and ensure required clearances.

STEP 2 Electrical Connections

Warnings and instructions for making the electrical connection for electric dryers.

STEP 3 Preparation of the Dryer

Clean the dryer drum and compartment with a damp cloth before first use.

STEP 4 Confirming Heat Source Operation

Test the dryer on a heat setting after completing all installation steps.

STEP 5 Additional Instructions for Installation of Your Dryer in a Manufactured or Mobile Home

Specific installation requirements for dryers in manufactured or mobile homes.

Stacking Kit

Installation Procedure

Step-by-step guide for assembling and attaching the LG stacking kit.

Level the dryer

Diagonal Check

Method to check dryer stability by pushing corners diagonally.

Electrical Requirement

Special Electrical Requirements for Mobile or Manufactured Homes

Specific electrical codes and standards for manufactured/mobile home installations.

Option 1: 4-wire connection with a Power supply cord

Instructions for connecting the dryer using a 4-wire receptacle and power cord.

Option 2: 3-Wire Connection with a Power Supply Cord

Instructions for connecting the dryer using a 3-wire receptacle and power cord.

Option 3: Optional 3-wire connection

Alternative instructions for a 3-wire connection based on local codes.