To Next Page

To Previous Page

Manually connecting the sound bar to the wireless subwoofer ([ See

“Connecting the wireless subwoofer manually” on page 8.)

If you see a red LED on the front of the wireless subwoofer, it means that the sound bar is not connected

to the subwoofer. If this is the case, connect them in the following order.

A Press the Power

button on the sound bar to turn it off.

B Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks

green.

- If you still see a red LED on the front of the wireless subwoofer, press and hold the button on the

back of the subwoofer again.

C Press the Power

button on the sound bar to turn it on.

D When the connection is established, you will see a green LED light on the front of the wireless

subwoofer.

Questions and Answers:

Need help?

Do you have a question about the LG DS40Q and is the answer not in the manual?

LG DS40Q Specifications

General

Audio decoders	Dolby Digital
TV Sound Share	Yes
RMS rated power	300 W
Audio output channels	2.1 channels
Soundbar speaker RMS power	100 W
Subwoofer location	Separate
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6 \
Display type	LCD
Product color	Black
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)	SimpLink
Cables included	Optical
Number of products included	1 pc(s)
Bluetooth version	4.2
Number of HDMI outputs	1
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	20 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	30 W
Package depth	219 mm
Package width	926 mm
Package height	417 mm
Package weight	9020 g