EasyManuals Logo

LG DS75Q User Manual

LG DS75Q
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
c Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
d Press the Settings button on the TV remote control to enter the [Speaker] menu and set the output speaker
to [Optical] or [External Speaker]. Settings and menu items may vary depending on the TV manufacturer.
Note
• If the optical input signal and the ARC signal attempt to connect at the same time, the ARC signal will take
priority.
When you use an LG TV
You can adjust the volume with the LG TV remote control if the TV is connected to the product with an optical
cable. You can only do so on a TV that supports the LG TV Sound Sync function. Check your TV’s user manual to
see if your TV is supported.
Functions controllable with an LG TV remote control
Volume, mute on/off
Note
• When the TV is properly connected to the product, “LGOPT” will appear on the status display.
• When using the product with an LG TV remote control, the volume and mute status set on the TV will
automatically be applied to the product.
• You can still use the product’s remote control even after connecting it to an LG TV.
• To use LG Sound Sync, you may have to change the sound setting of your TV. It may vary depending on the TV.

Other manuals for LG DS75Q

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG DS75Q and is the answer not in the manual?

LG DS75Q Specifications

General IconGeneral
Audio decodersDTS Digital Surround, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power380 W
Audio output channels3.1.2 channels
Soundbar mode controlYes
Audio sample rate (24bit)96 kHz
Soundbar speaker RMS power- W
Subwoofer locationSeparate
Subwoofer connectivityWireless
Display typeLCD
Product colorSteel
Audio formats supportedAAC, AAC+, FLAC, LPCM, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)SimpLink
High Dynamic Range (HDR) technologyDolby Vision, High Dynamic Range 10 (HDR10)
Cables includedHDMI, Optical
Number of products included1 pc(s)
Wi-FiNo
Bluetooth codecAAC, SBC
Bluetooth version4.2
Number of HDMI outputs1
AC input voltage200 - 240 V
AC input frequency50 - 60 Hz
Soundbar power consumption38 W
Power consumption (standby)0.5 W
Subwoofer power consumption33 W
Package depth247 mm
Package width1027 mm
Package height470 mm
Package weight13700 g
Weight and Dimensions IconWeight and Dimensions
Depth119 mm
Width890 mm
Height65 mm
Soundbar weight3790 g
Subwoofer depth290 mm
Subwoofer width180 mm
Subwoofer height394 mm
Subwoofer weight5800 g

Related product manuals