73
Turning off the Demo Mode
Issue Solution
The remote
control does
not work
• Does the text on the status display remain unchanged, even if you press the
Function
button several times?
• Do you only see the text “DEMO” in the status display?
- The demo mode may be activated on the product. Unplug the product's
power cable and plug it back in.
- If the remote control still does not work, press the Volume
button on
the product to set the volume level at 2, the press and hold the Function
button for about 5 seconds. If the currently selected function appears on the
status display, it means that demo mode has been turned off.
To Next Page
Loading...
