LG DSG10TY - Page 8

8
Connecting the wireless subwoofer manually
If you see a red LED on the wireless subwoofer, it means that the soundbar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power
button on the soundbar to turn it off.
b Press the PAIRING button on the wireless subwoofer. Check if the LED on the subwoofer is blinking
green. If you still see a red LED on the wireless subwoofer, press and hold the button on the back of
the subwoofer again.
c Press the Power button on the soundbar to turn it on.
d When the connection is established, you will see the LED light on the wireless subwoofer light up in
green.
Note
• Install the soundbar as close to the wireless subwoofer as possible. The closer the distance between
the soundbar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the soundbar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the soundbar or the
wireless subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless
routers, microwave ovens, etc.).