Entering set up mode.
You will see LqC1
Button Display
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Press the
COLORS
button until appears in the display.
Press the
START
button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2.
Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the WHITES button twice.
2. Factory reset -
After factory reset, machine information is changed to the default value.
To Next Page
Loading...
