EasyManuals Logo

LG F2J7HM Series User Manual

LG F2J7HM Series
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
44
EN
Symptoms Reason Solution
Dry problem Check water supply tap.
Do not overload. Check that the
washing machine is draining properly
to extract adequate water from the
load. Clothes load is too small to
tumble properly. Add a few towels.
Turn off water supply tap.
Odor
This odor is caused by the rubber
attached to the washing machine.
It is the normal odor of new rubber
and will disappear after the machine
has been run a few times.
If the rubber door gasket and door
seal area are not cleaned regularly,
odors can occur from mold or
foreign substances.
Be sure to clean the gasket and door
seal regularly and check under the
door seal for small items when
unloading the washer.
Odors can occur if foreign
substances are left in the drainage
pump filter.
Be sure to clean the drainage pump
filter regularly.
Odors can occur if the drainage
hose is not properly installed,
causing siphoning (water flowing
back inside the washing machine).
When installing the drainage hose,
be sure that it doesn’t become
kinked or blocked.
Using the dry function, odors can
occur from lint and other laundry
matter sticking to the heater. (Dryer
model only)
This is not a malfunction.
A particular odor can occur from
drying wet clothes with hot air.
(Dryer model only)
The odor will disappear after a short
while.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG F2J7HM Series and is the answer not in the manual?

LG F2J7HM Series Specifications

General IconGeneral
BrandLG
ModelF2J7HM Series
CategoryWasher
LanguageEnglish

Related product manuals