EasyManua.ls Logo

LG F2Y1TYP6J - User Manual

LG F2Y1TYP6J
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
F2Y1TYP6J
MFL72097542
Rev.00_011624
www.lg.com
Copyright © 2024 LG Electronics Inc. All Rights Reserved.

Questions and Answers

  • M
    Michael JohnsonAug 11, 2025
    What to do if my LG F2Y1TYP6J Washer shows UE UNBALANCE ERROR?
    • P
      Paul CunninghamAug 11, 2025
      If your LG Washer displays a UE UNBALANCE ERROR, it could be due to a couple of reasons. The clothes may be too wet at the end of the cycle. Try rearranging the load to allow proper spinning, then close the door and press the Start/Pause button. It may take a few moments before the appliance begins to spin. The door must be locked before spin can be achieved. Another cause might be that the load is too small. In this case, add 1 or 2 similar items or smaller articles of clothes to help balance the load. Close the door and press the Start/Pause button again.
  • I
    iwilliamsAug 25, 2025
    How to fix 1E INLET ERROR on my LG F2Y1TYP6J?
    • C
      Christian BriggsAug 26, 2025
      If you're seeing a 1E INLET ERROR on your LG Washer, it indicates a water supply issue. First, check another tap in the house to ensure the water supply is adequate. Next, make sure the water supply tap is completely open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose. Finally, the filter of the supply hoses might be clogged. Turn off the taps, remove the hose connections to the washing machine, and then check and clean the inlet valve filter.

LG F2Y1TYP6J Specifications

General IconGeneral
BrandLG
ModelF2Y1TYP6J
CategoryWasher
LanguageEnglish

Related product manuals