21
■ Control panel
Power
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Program dial
• Programs are available according to the
laundry type.
• Lamp will light up to indicate selected
program.
Additional program
• Use these buttons to select the desired
cycle options for the selected cycle.
LED display
• The display shows the settings, estimated
time remaining, options, and status
messages for your washer.
The display will remain on through the cycle.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press the Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
Options
• This allows you to select an additional cycle
and will light when selected.
How to use washer
Start/Pause
button
Option
buttons
Power
button
Additional
program
buttons
Beep
On/Off
LED
display
Program
dial
SMARTDIAGNOSIS™ function is
available only for the products
with a SMARTDIAGNOSIS™ mark.
To Next Page
Loading...
