41
EN
Symptoms Reason Solution
UE rebalancing operation is
not successful.
• The automatic attempt to rebalance the
load was not successful. The cycle has
been paused to allow the load to be
manually adjusted.
The load is too small.
• Add more items to allow the washing
machine to balance the loads.
Heavy articles are mixed with
lighter items.
• Wash articles of somewhat similar weight.
The load is out of balance.
• Manually redistribute the load if articles
have become tangled.
Control error.
• Unplug the power plug and call for
service.
Water level is too high due to
a faulty water valve.
• Close the cold water tap, unplug the
washing machine, and call for service.
The water level sensor is not
working correctly.
• Close the cold water tap, unplug the
washing machine, and call for service.
A motor error has occurred.
• Allow the washing machine to stand for 30
minutes and then restart the cycle. If the
LE error code persists, call for service.
It is time to run the Tub Clean
programme.
• Run the Tub Clean programme.
Pedestal washing machine is
being operated without a full-
size washing machine.
• Pedestal washing machine will not
operate as a standalone unit. It must
be stacked under an LG front-loading
washing machine.
Stacking switch is not
working properly.
• The stacking switch will not operate
properly if the unit is stacked under a
non-LG appliance, or an LG appliance
manufactured before 2017.
Drain hose, supply hose or
drain pump is frozen.
• Thaw out the supply hose using a hot
water cloth.
• Pour warm water in the drum.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
• To deactivate, turn off the Child Lock in
control panel of the front-loading washing
machine or press the Tub Clean and
Extra Rinse button for three seconds
in control panel of the edestal washing
machine.
To Next Page
Loading...
Need help?
General
