28
SMART FUNCTIONS
EN
LG ThinQ Application
The LG ThinQ application allows you to
communicate with the appliance using a
smartphone.
LG ThinQ Application Features
Communicate with the appliance from a
smartphone using the convenient smart
features.
Washer Cycle (Remote Start,
Download Cycle)
Set or download any preferred cycle and
operate by remote control.
Tub Clean Coach
This function shows how many cycles remain
before running the Tub Clean function.
Energy Monitoring
This function checks the energy consumption
of the recently used cycles and monthly
average.
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the
appliance based on the pattern of use.
Settings
Allows you to set various options on the
appliance and in the application.
Push Alert
When the cycle is complete or the appliance
has problems, you have the option of receiving
push notifications on a smartphone. The
notifications are triggered even if the LG ThinQ
application is off.
NOTE
• If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
• The application is subject to change for
appliance improvement purposes without
notice to users.
• Functions may vary by model.
Before Using LG ThinQ
Application
1
Check the distance between the appliance
and the wireless router (Wi-Fi network).
• If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2
Turn off the Mobile data or Cellular Data
on your smartphone.
3
Connect your smartphone to the wireless
router.
NOTE
• To verify the Wi-Fi connection, check that f
icon on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
• LG ThinQ is not responsible for any network
connection problems or any faults,
malfunctions, or errors caused by network
connection.
To Next Page
Loading...
