16 Multi Type Air Conditioner
Operating Instructions
PLASMA Air Purifying Operation only
Press the Start/Stop button.
The unit will respond with beep sound.
Open the door on the Remote
Controller. Press the PLASMA air
purifying operation ON/OFF button.
Operation will start when the button
is pressed and stop when the button
is pressed again.
Set the fan speed. You can select the fan speed in
four steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan speed
mode is shifted.
h Air purifying operation (PLASMA) is
available in Heating or any other operations.
1
2
3
PLASMA Purification Operation(Optional)
If you press the PLASMA button, PLASMA air
purifying operates.
Each time the button ( ) is pressed, the fan
speed mode is shifed.
To Next Page
Loading...