To Next PageTo Next PageWhy LG Air Conditioner does not cool or heat effectively?
If your LG Air Conditioner isn't cooling or heating effectively, several factors could be at play. First, check if the air filter is dirty and clean it according to the instructions. Second, ensure that the temperature is set correctly. Finally, make sure that the air inlet or outlet vents of the indoor unit are not obstructed.
What to do if my LG FM19AH.UE0 does not operate?
If your LG Air Conditioner isn't operating, check the room temperature setting. Also, verify that the circuit breaker is on.
Why is my LG FM19AH.UE0 Air Conditioner so noisy?
The noise from your LG Air Conditioner could be due to a couple of reasons: If it sounds like water flowing, that's just the refrigerant moving inside the unit. If it sounds like compressed air releasing, that's the dehumidifying water being processed.
What to do if condensation is leaking from my LG FM19AH.UE0 Air Conditioner?
If you notice condensation leaking from your LG Air Conditioner, check that the drain hose is tightly connected and that the indoor unit is installed evenly.
What to do if LG FM19AH.UE0 Air Conditioner remote controller display is faint?
If the remote controller display for your LG Air Conditioner is faint or completely blank, start by checking if the batteries are depleted. If not, ensure that the batteries are inserted correctly, matching the (+) and (-) directions.
Why does my LG Air Conditioner make crack sound?
The cracking sound you hear from your LG Air Conditioner is normal. It's caused by the expansion and constriction of parts like the front panel due to temperature changes.
What to do if my LG Air Conditioner won't turn on for 3 minutes?
General| Brand | LG |
|---|---|
| Model | FM19AH.UE0 |
| Category | Air Conditioner |
| Language | English |
Critical safety instructions and warnings for the installation process.
Essential safety rules to follow during the operation of the air conditioner.
Measures to protect health and the environment during use.
Steps to take before operating the unit, including installation and connection.
Recommendations for proper and safe usage of the air conditioner.
Introduction to cleaning procedures and maintenance schedules.
Contact details for authorized service dealers for repairs.
Explanation of symbols used throughout the owner's manual.
Guide to installing batteries and tips for using the remote controller.
Explanation of the signal receptor and the function of various indicator lamps.
Details on Cooling, Auto, Healthy Dehumidification, and Heating modes.
Information on Defrost, Air Circulation, Sleep, Timer, Auto Clean, Jet Cool, and Plasma.
Comprehensive guide to using each button on the remote controller.
Step-by-step instructions for operating the unit in Cooling Mode.
Instructions for using the automatic operation mode.
Guide to operating the Healthy Dehumidification mode.
Instructions for operating the unit in Heating Mode.
How to activate Jet Cool for rapid temperature adjustment.
Guide to activating and using the Plasma purification feature.
Explanation and usage of the 2nd F function for special operations.
How to set the Sleep Mode for automatic unit turn-off.
Instructions for setting the timer for start and stop operations.
Guide to configuring delay start and pre-set stop timer functions.
How to adjust vertical and horizontal airflow directions.
Using the mode to circulate air without cooling or heating.
Guide to the Auto Clean feature for specific models.
How to control the brightness of the unit's display.
Operating the unit directly with the power button.
Explanation of the unit's behavior after a power interruption.
Instructions for cleaning the unit's exterior and the remote controller.
Procedure for cleaning the air filters of standard models.
Maintenance for Plasma and Triple Deodorizing filters.
Recommended replacement period and procedure for purifying filters.
Specific instructions for cleaning air filters on Artcool type units.
Guide to cleaning purifying filters on Artcool Deluxe models.
Instructions for cleaning air and plasma filters on Artcool Mirror units.
Steps for preparing the unit for extended periods of non-use.
Steps to take to prepare the unit for operation after storage.
