Operation
22
Ice Making
•
Fill water in ice making tray. Only fill
with enough water to maintain
individual blocks, if over filled blocks
will not separate properly and water
may spill into ice bin clumping ice
together.
•
Ice will be dropped into the ice
storage bin by rotating ice separation
handle of ice making compartment.
Defrosting
•
Defrosting takes place automatically.
•
The defrosting water flows down to the evaporating
tray and is evaporated automatically.
Note
•
Rotating the ice separation handle before ice is fully
frozen may cause the remaining water to drop into
the ice storage bin and clump ice together.
To Next Page
Loading...
