STEP 6
• Next, use your pry tool to lift the
screen off the frame so you will be
able to put replacement part on the
frame.
• Slide the pry tool in between plastic
black frame and the glass. Try to get
underneath the lcd as well.
• Might want to heat for 5 to 6 seconds
around frame one time to help
separate the adhesive. If so, Make
sure to move heat gun in a constant
motion.
• Make sure to peel Digitizer/lcd cables
up off the frame using flat end of
spudger.
Tools: Philips screwdriver,
spudger
To Next Page
Loading...
