STEP 2
• The components are transferred over so it is now time for
reassembly.
• Place the motherboard into the replacement part frame.
After that is in place reconnect the flex cables.
• Then take the display and place it into the back part of the
phone this may require you to use a isesamo to slide the
side of the display into place starting at the top of the
device.
• Once it is positioned and laying flush, screw in the two (2)
Philips screws at the bottom of the display.
• Slide the battery into the phone and power on.
• Put sim card back into the phone.
Tools: Philips screwdriver,
spudger
Reassemble of Device
To Next Page
Loading...
