49
1
2
2
3
1
Removing /
Installing freezer drawers
• To ensure good air
appliance, insert the freezer
drawers all the way.
• If large quantities o
in the freezer the upper or middle drawer
taken of the freezer compartment can be
out of the appliance and food can be
stored directly on the wire shelf.
• To remove one of the freezer drawer do
the following:
1. Pull the drawer
2. Lift the front part up and remove the
drawer.
• Freezer compartment is provided with
wire shelves to maximize the food storage
capacity.
circulation in the
f
food are to be stored
until it stops;
• To install a freezer
freezer do the same steps in reverse
order:
1. Put the drawer o
the angle of 45 °;
2. Lower the front part to one level with the
guides;
3. Push the drawer
Make sure that the angle of the drawer
is not skewed.
drawer back into the
n the guides at
until it stops.
Don't apply a overwhelming effort and
brute force on
drawer and shelves -
it could damage the refrigerator.
(wire shelf is applicable to some
models only)
WARNING!
ENG
OPERATION
EN SHGLI
To Next Page
Loading...
