67
My device name - Enter a name
for your GD330.
Supported services - View the
profile supported by GD330.
My address - View your Bluetooth
device address.
Pairing with another Bluetooth
device
By pairing your GD330 and another
device, you can set up a passcode-
protected connection. This means
your pairing is more secure.
1 Check your Bluetooth is On and
Visible. You can change your
visibility in the Settings menu.
2 Select Paired devices, then press
New.
3 Your GD330 will search for
devices. If devices are found,
Refresh and Add will appear on
screen.
4 Choose the device you want to pair
with and enter a passcode then
press Add.
5 Your phone will then connect to the
other device, on which you should
enter the same passcode.
6 Your passcode-protected Bluetooth
connection is now ready.
Using a Bluetooth headset
1 Check your Bluetooth is On and
Visible.
2 Follow the instructions that came
with your headset to place your
headset in pairing mode and pair
your devices.
3 Select Yes to Connect now. Your
GD330 will automatically switch to
Headset profile.
GD330_Iran_E_0310.indd 67 10. 3. 10. 오후 6:06
To Next Page
Loading...
