LG GSLV71PZTD - Page 36

36
LG ThinQ Application
NOTE
• To verify the Wi-Fi connection, check
that the Wi-Fi indicator on the control
panel is lit.
• The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet
service provider or refer to your
wireless router manual.
•
LG ThinQ is not responsible for any
network connection problems or any
faults, malfunctions, or errors caused
by network connection.
• If the appliance is having trouble
connecting to the Wi-Fi network, it may
be too far from the router. Purchase a
Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect
or may be interrupted because of the
home network environment.
• The network connection may not work
properly depending on the Internet
service provider.
• The surrounding wireless environment
can make the wireless network service
run slowly.
• The appliance cannot be registered
due to problems with the wireless
signal transmission. Unplug the
appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
• The wireless network name (SSID)
should be a combination of English
letters and numbers. (Do not use
special characters.)
• Smartphone user interface (UI) may
vary depending on the mobile
operating system (OS) and the
manufacturer.
• If the security protocol of the router is
set to
WEP , you may fail to set up the
network. Please change it to other
security protocols (
WPA2 is
recommended) and register the
product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application
from the Google Play Store or Apple App
Store on a smartphone. Follow
instructions to download and install the
application.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG
ThinQ
application, allows the appliance
to connect to a home Wi-Fi network. The
Wi-Fi indicator shows the status of the
appliance’s network connection. The Wi-
Fi indicator illuminates when the
appliance is connected to the Wi-Fi
network.
•
Initial Appliance Registration
Run the LG ThinQ application and
follow the instructions in the
application to register the appliance.
•
Re-registering the Appliance or
Registering Another User