42
Water Filter
further assistance, visit our website
at lg.com
Thread Nut Type
*1
1
Loose the screw cap.
2
Pull the pipe out from the water filter
cap until the colored line
A
is visble.
3
Push the pipe into the water fitler cap,
making sure the end is fully sealed.
4
Tighten the screw cap until the
colored line in the water filter is no
longer visible.
5
Press and hold the
Water Filter
button for three seconds. That resets
the
Replacement Filter
icon. The
new water filter has been activated.
6
Dispense water for approximately 5
minutes to remove trapped air and
contaminants from the system.
To Next Page
Loading...
