To Next PageTo Next PageWhy does my LG GT66BP make a vibration or rattling noise?
A vibration or rattling noise may occur if the refrigerator is not resting solidly on the floor. This could be due to a weak or uneven floor, or the leveling legs may need adjusting. Refer to the Installation section for leveling instructions.
Why is it difficult to open the doors of my LG GT66BP?
If the doors are difficult to open, the gaskets might be dirty or sticky; clean them and the surfaces they touch, and consider applying a thin coat of appliance polish or kitchen wax. Reopening the door shortly after it was opened can create a vacuum; wait one minute to allow the air pressure to equalize. The temperature control in the refrigerator compartment might be set too cold; use the Temperature Adjust button to set a warmer temperature. Also, if the refrigerator is installed in a cold location (below 41°F or 5°C), food can freeze, so avoid operating it in temperatures below 55°F (13°C).
Why is my LG GT66BP Refrigerator or Freezer section too cold?
If the temperature is too cold, it may be because the controls are not set correctly for the conditions. Raise the temperature setting one increment at a time, referring to the Setting the Controls section. Wait 24 hours after changing control settings before making additional adjustments.
Why do lights not work in my LG GT66BP?
If the lights aren't working, first ensure the power supply cord is firmly plugged into a live outlet with proper voltage. If an LED light has malfunctioned, unplug the refrigerator or turn off power at the circuit breaker or fuse box before replacing it. Note that LED interior lighting service should only be performed by a qualified technician.
Why does my LG GT66BP Refrigerator have frost or ice crystals on frozen food?
This issue can arise if the door is not closing properly. Also, frequent door openings allow warm, humid air into the freezer, leading to frost formation.
Why is my LG GT66BP not cooling?
Your LG Refrigerator may not be cooling due to several reasons. It could be as simple as the power cord being unplugged; ensure it's firmly plugged into a working outlet. A blown fuse or tripped circuit breaker could also be the culprit; replace the fuse or reset the breaker. Also, check if the refrigerator is in Demo Mode, indicated by the OFF light being illuminated; to disable it, press the Temperature Adjust button until you set the desired temperature level. If it is in the defrost cycle, wait about 30 minutes for it to end. Finally, the refrigerator control might be set to the OFF position; check the Setting the Controls section.
How to fix LG GT66BP Refrigerator icemaker that is not producing ice?
If the icemaker isn't producing ice, wait 12 to 24 hours after installation for ice production to begin, and 72 hours for full production. Ensure the refrigerator is connected to a water supply and the supply valve is fully open. Reverse osmosis water filtration systems can reduce water pressure, so check the Water Pressure section. Straighten any kinks in the water source line. The icemaker produces about 95 cubes in 24 hours. Confirm the icemaker is turned ON. Clear any foreign substances or frost from the ice-detecting sensor. The freezer temperature should be 0°F. Avoid opening the doors too often, and ensure they close properly.
General| Energy Efficiency Class | A+ |
|---|---|
| Noise Level | 39 dB |
| Door Cooling | Yes |
| Multi Air Flow | Yes |
| Smart Diagnosis | Yes |
| Bio Shield (Gasket) | Yes |
| Display | LED |
