LG H990ds - Calibration Procedures; Calibration Information Summary; USB COM Port Setup for Calibration; Calibration Cable Connections

Copyright ⓒ 2016 LG Electronics. Inc. All right
reserved. Only training and service purposes
LGE Internal Use Only
10. CALIBRATION
1. Summary
2. . USB COM port Setting
4. Tachyon setting
3. Calibration Cable setting
※ If you want more information, please refer LGST ServiceCenter Tool’s Notification “RF Calibration User Guide”.
CAL
INFORMATION
S/W VERSION
[TachyonV2013] LGH990DS 20160929 ALL File Calibration
Please Check the Version to "B2B"
H/W
Name Part No.
PIF PIF200 BJAY0024021
USB Cable USB Cable RAD32947882
Power Cable DC Power Cable RAD32247878
I/O Cable USB type C + Esata RAD32947853
RF Cable_Main MXFJM3WX6000 RAD32827895
Power Supply_PIF DC 5.2V
Power Supply_Phone Power supply control
PF Test Equipment
Notice
1. Use the Battery (Refer to Attached ppt)
1) Phone states: Power off
2) If do not use the battery, TX fails.
2. Port Setting (Refer to Attached ppt)
1) Uart Port1 : Use the "LGE Mobile USB Serial Port"
CMW 500 RF
Cable connection
154