Installation
i
i
Caution: During the following step, hold unit firmly until window sash
is lowered to top channel behind side panel frames. Pemonal injury or
prope_ damage may result if unit falls from window.
1_Install the air conditioner in the window
1ol. Carefully li_ the air _nditioner and
slide it into the open window. Make
sure the _ttom guide of the air
conditioner drops into the notches of
the L bracket.
: When the air conditioner drops
into the L bracket, the air _nditioner
will be center_ in window opening.
CENTER UNE
1=2_
While steadying the air conditioner,
car,efu!ly bring the wind_ sash
down behind the upper guide of the
air conditioner.
When the air _nditioner is properiy
installed, it should tilt slightly down at
the back° if it is set correctly in the
window, it will hang lower in the back
automatically, if it does not, there is a
problem with the installation.
BOTTOM
GUWOE
_L
L BR_KET
2, Secure the guide panels
Extend the guide panel's (Type G) to
fill the window opening using 2 screws (Type B),
2 screws (Type C) to secure them
3. Install the sash seal and sash lock
3_1.
3_2.
Cut the sash seal (Type F) to the
wind_ width. Stuff the sash seal
be_een the glass and the wind_
to prevent air and insets from
getting into the room.
Fasten the L bracket using a screw
(Type A)
3-3. Remove the screws that s_ure the
cabinet and base pan in the right
SASH
('TYPEF}
4. Window installation of room air conditioner is now completed.
See ELECTRICAL DATE for a_ching power cord to electrical outlet.
14 Room Air ,Cond#ioner
To Next Page
Loading...
