LG K30 - Anti-Theft Guide; Open Source Software Notice Information

45
Anti-Theft Guide
You can set up your device to prevent other people from using
it if it’s been reset to factory settings without your permission.
For example, if your device is lost, stolen, or wiped, only
someone with your Google account or screen lock information
can use the device.
All you need to make sure your device is protected is:
•
Set a screen lock: If your device is lost or stolen but you
have a screen lock set, the device can’t be erased using the
Settings menu unless your screen is unlocked.
•
Add your Google account on your device:
If your device is wiped but you have your Google account
on it, the device can’t finish the setup process until your
Google account information is entered again.
After your device is protected, you’ll need to either unlock
your screen or enter your Google account password if you
need to do a factory reset. This ensures that you or someone
you trust is doing the reset.
• Do not forget your Google account and
password you had added to your device prior to
performing a factory reset. If you can’t provide
the account information during the setup
process, you won’t be able to use the device at
all after performing the factory reset.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL, and other
open source licenses, that is contained in this product, please
visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last
shipment of this product. This offer is valid to anyone in
receipt of this information.