41
A tone sounds in the earpiece, and the display will show the second call animation.
This feature, known as
Call Waiting
, is only available if your network supports it. For
details of how to activate and deactivate it see
Call Waiting
(Menu 9.6.4, see p. 109)
If Call Waiting is on, you can put the first call on hold and answer the second, by
pressing . Use handset/Use Bluetooth (when we connect to BT).
Rejecting an Incoming Call
You can reject an incoming call without answering by simply pressing the key.
During a call, you can reject an incoming call by pressing the key.
Muting the Microphone
You can mute the microphone during a call by pressing Right soft key [MUTE].
The handset can be unmuted by pressing Right soft key [Unmute]. When the
handset is muted, the caller cannot hear you, but you can still hear them.
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use the phone with an automatic
switchboard) press the key [Options] followed by Send DTMF – DTMF on. Select
DTMF off to disable DTMF tones. DTMF tones are normally on.
In-Call Menu
To Next Page
Loading...
