50
LG KEYBO
TOOLS
Digit Dial Readout On/ Off
Choice List
Automatic/ Always Off
Sensitivity Adjust the sensitivity as
Reject More/ Automatic/ Reject
Less.
Train Voice If the phone asks you to
repeat your voice command too
often, train the phone to recognize
your voice patterns. Digit Dial/
Responses
Prompts Mode/ Audio Playback/
Timeout
For Mode, set Prompts/ Readout +
Alerts/ Readout/ Tones Only.
For Audio Playback,
set Speakerphone or Earpiece.
For Timeout, set 5 seconds or
10 seconds.
Call Alert
Ring Only/ Caller ID +
Ring/ Name Repeat
4.1 Call <Name or Number>
Say "Call" and then call someone
simply by saying the phone number or
name. Please speak clearly and
exactly as in your Contacts list. When
you have more than one contact
number, you can state the name and
the number type of the contact (for
example, 'Call John Work').
4.2 Send Msg to <Name or
Number>
Say 'Send Message' and the voice
command will prompt you for the type
of message. After choosing the
message type, system will ask you for
the contact name, number or group. It
will automatically start a message. If
you say a full-sentence command,
such as 'Send Message to Bob', it
would automatically start a text
message without asking for the
message type. When using 'Send
Message' command, speak clearly
and say the number, group name, or
name exactly as it is entered in your
Contacts list.
4.3 Go to <Menu>
The 'Go to' command allows you to
access a menu within the phone (for
example, 'Go to Calendar').
If no menu option is stated, a list of
options will be provided.
4.4 Check <Item>
The "Check" command allows you to
check out a wide range of items from
the battery level, service mode, signal
strength, GPS location, network
status, volume, number of missed
calls, voicemail, messages, to time
and date.
To Next Page
Loading...
