Take pictures Menu 6.1
Press the Menu key and select
Camera > Ta ke a
picture
using the navigation keys. Or you can directly
open the camera module by a press of the Camera
key in standby mode. The camera module opens and
you’ll see the view to be captured.
1. Digital zoom ( ) :
x1, x2, x3, x4
2. Tone ( ) :
Colour, Sepia, Black and white
3. Brightness ( ) :
+2, +1, 0, -1, -2
4. Timer ( ) :
Off, 3 sec., 5 sec.
5. Memory ( ) :
Shows the current memory
status.
Note
]
If the memory is full, “Memory full” message is popped
up and you cannot save a photo. Create space by
deleting old photos in Photo album.
6. Resolution ( ) :
640x480(VGA),
320x240(QVGA), 160x120(QQVGA).
48x48(Address book)
7. Image quality ( ) :
Fine/Normal/Basic
1. Centre the desired option menu using the
left/right navigation keys.
2. Select the desired value with the up/down
navigation keys.
3. After finishing all the settings, focus on the subject
to capture and press the Camera key or OK key.
With a click, the image is captured and the
following menu bar appears.
preview option
menu bar
Album Back
Camera
53
Camera
KG220 Ger(eng)_O2_0504 2006.5.4 10:2 AM Page 53
To Next Page
Loading...
