Each profile has submenus as follows:
]
Activate:
Activates the selected profile.
]
Settings:
Use this to edit and change WAP settings
for the selected profile.
-
Homepage:
This setting allows you to enter the
address (URL) of a site you want to use as
homepage. You do not need to type http:// at
the front of each URL as the WAP Browser will
automatically add it.
-
Bearer:
You can set the bearer data service.
1 Data
2 GPRS
-
Data settings:
Appears only if you select Data
Settings as a Bearer / service.
Dial number:
Enter the telephone number to dial
to access your WAP gateway.
User ID:
The users identity for your dial-up server
(and NOT the WAP gateway).
Password:
The password required by your dial-up
server (and NOT the WAP gateway) to identify
you.
Call type:
Select the type of data call : Analogue
of Digital (ISDN)
Linger time:
You need to enter timeout period.
After entering that, the WAP navigation service
will be unavailable if any data is not input or
transferred.
-
GPRS settings:
The service settings are only
available when GPRS is chosen as a bearer service.
APN:
Input the APN of the GPRS.
User ID:
The users identify for your APN server.
Password:
The password required by your APN
server.
- Proxy settings
Proxy:
On/Off
IP address:
Input the IP address of the Proxy
server you access.
Port number:
Input the Proxy Port
-
DNS settings
Primary server:
Input the IP address of the
primary DNS server you access
o2 Active
58
o2 Active
KG220 Ger(eng)_O2_0504 2006.5.4 10:2 AM Page 58
To Next Page
Loading...
