LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
- 16 -
SKY77318 PAM Pin Configuration-20-Pin
Leadless (Top View)
Figure 6. Typical Case Makings
Table 4. SKY77318 Pin Names and Signal Descriptions
Pin Mame Description
1BSBand Select
2 VCC1A VCC (to GSM 1st stage, DCS/PCS 1st stages, BiCMOS PAC)
3 DCS/PCS IN RF input 1710-1910 MHz (DCS1800, PCS1900)
4 GND IN RF input 880-915 MHz (GSM)
5 GND RF and DC Ground
6 VCC1B VCC (to GSM 2nd stage, DCS/PCS 2nd stages)
7 GND RF and DC Ground
8 GND RF and DC Ground
9 GND RF and DC Ground
10 GND RF and DC Ground
11 GSM OUT RF Output 880-915 MHz (GSM)
12 GND RF and DC Ground
13 GND RF and DC Ground
14 GND RF and DC Ground
15 DCS/PCS OUT RF Output 1710-1910 MHz (DCS 1800, PCS1900)
16 GND RF and DC Ground
17 VBATT Battery input to high side of intemal sense resistor
18 ENABLE BiCMOS Enable
19 RSVD(GND) RF and DC Ground
20 VAPC Power Control Bias Voltage
GMD PAD GND Ground Pad, device underside
To Next Page
Loading...
