LG KG320 - Page 123

11. AUTO CALIBRATION
- 124 -
Figure 11-3 The top view of Test JIG
D. Test Jig Operation
1234
ADI-REMOTE
TI-REMOTE
PS
VBAT
JTAG2
JTAG1 USB
TA
+
PS
_
POWER
ON
OFF
TA
POWER
MON
Status
UART
Status
ON
OFF
MON
UART
PHONE
Power Source Description
Power Supply Usually 4.0V
Travel Adaptor Use TA, name is TA-20G(24pin)
Table 11-2 Jig Power
Switch Number Name Description
Switch 1 ADI-REMOTE In ON state, phone is awaked. It is used ADI chipset.
Switch 2 TI-REMOTE In ON state, phone is awaked. It is used TI chipset.
Switch 3 VBAT Power is provided for phone from battery
Switch 4 PS Power is provided for phone from Power supply
Table 11-3 Jig DIP Switch