9. ENGINEERING MODE
- 162 -
9.10 Fact. Reset [MENU 6]
This Factory Reset menu is to format data block in the flash memory and this procedure set up the
default value in data block.
Attention
1 Fact. Reset (i.e.Factory Reset) should be only used during the Manufacturing process.
2 Servicemen should NOT progress this menu, otherwise some of valuable data such as Setting
value, RF Calibration data, etc. cannot be restored again.
9.11 S/W version [MENU 7]
This displays software version stored in the phone.
9.12 MM S/W Download [MENU 8]
1) M3M : This menu downloads to ISP NOR flash memory.