Installation
21
Inserting the memory card
Insert the memory card into the slot until the memory
card is fully inserted into the slot, as shown in the
figure below:
Open the memory card slot
Insert the memory card
Removing the memory card
1. Push in memory card with the tip of your finger into
the slot.
2. Carefully pull the memory card out of slot.
Remove the memory card
Note
]
The memory card must be removed or inserted
only when necessary as its removal/insertion
may lead to failure.
]
When inserting an external memory card,
remove and insert it again if its icon appears
red. (If the icon remains red after re-insertion,
the memory card may likely be damaged, so
replace it with another one.)
To Next Page
Loading...
