Installing the USIM and battery
3 Install the USIM card
Slide the USIM card into the USIM
card holder making sure that the gold
contact area on the card is facing
downwards. To remove the USIM card,
pull it gently in the opposite direction.
4 Install the battery
Insert the top of the battery first
into the top edge of the battery
compartment. Ensure that the battery
contacts align with the terminals on
the phone. Press down the bottom of
the battery until it clicks into place.
5 Charging your phone
Lift and twist the charger socket cover
of the on the side of your KP500. Insert
the charger and plug it into a mains
electricity socket. Your KP500 needs to
be charged until “Battery full” appears
on screen.
To Next Page
Loading...
