63
01
02
03
04
05
06
07
08
Settings
1 Touch then choose .
2 Touch then choose from the list
below.
Date and time - Adjust your date
and time settings or choose to auto
update the time when you travel or for
daylight saving.
Power save - Choose to switch the
factory set power saving settings On
or Off.
Languages - Change the language of
your KP500’s display.
Auto key lock - Lock the keypad
automatically in standby screen.
Security - Adjust your security
settings, including PIN codes and
handset lock.
Memory manager - See Using
memory manager on page 64 for
more information.
Reset settings - Reset all the settings
to their factory definitions.
Handset information - View the
technical information for your KP500.
Changing your connectivity
settings
Your connectivity settings have already
been set up by your network operator, so
you can enjoy your new phone from the
off. If you want to change any settings,
use this menu.
Touch then .
Select .
Network settings
Select Network - If you set to
Automatic, KP500 automatically
searches for the network and registers
the handset to the network. This is
recommended for best service and
quality.
If you set to Manual all the currently
available networks are shown and you
can select one of them for registration.
If the registration of the network has
failed, the network lists are listed again
and you can select any other one for
registration.
NOTE: When your handset loses the
network in manual mode, the popup
message to select the available
network will be shown on the Idle
screen.
To Next Page
Loading...
