A bubble window pops up and shows
scanned appropriate Access Points
near users.
v
You can select the Access Point that
you are permitted to access and
tap OK.
v
Then select The Internet to have an
Internet service and tap Connect.
Note
If your Wi-Fi service provider or
network administrator sets WEP
encryption for network security, you
should fill in WEP key in the pop-up
window. If WEP encryption is not set,
this pop-up window is not shown.
If you don’t know the key, you need
to ask it to your Wi-Fi service provider
or network administrator.
If Wi-Fi connection is finished, you can
see the connection name (SSID) in the
Wireless Manager.
To turn off Wi-Fi, tap Wi-Fi in the
Wireless Manager again.
SETTINGS
To Next Page
Loading...
